DC power supply for LED tape & LinkLed type products, Universal mains input
Dimensions: | 160 x 46 x 30mm |
Input Voltage: | 90 ~ 264VAC 127 ~ 370VDC |
Input Frequency: | 47 ~ 63Hz |
Power Factor: | PF>0.9 at 75 ~ 100% load, 115VAC / 230VAC |
Input Current: | 0.4A/115VAC 0.2A/230VAC |
MTBF: | 625.5Khrs min. MIL-HDBK-217F (25°C) |
| TUV EN61347-1, EN61347-2-13 approved, EMC Compliance to EN55015; EN61000-3- |
Safety Standards: | 2 Class C (Pin>25W), Class D (>70% load); EN61000-3-3; EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level, criteria A |
Leakage Current <0.5mA / 240VAC
Voltage Tolerance ±10%
Line Regulation ±3.0%
Load Regulation ±5.0%
Set Up Time 1500ms / 230VAC 300ms / 115VAC at full load
Over Current Protection 100 ~ 110%
Constant current limiting, recovers automatically after fault condition is removed
Short Circuit Protection, Hiccup mode, recovers automatically after fault condition is removed.
Over Voltage Protection Shut down o/p voltage, re-power on to recover
Over Temperature Protection 95°C ±10°C (TSW1)
Shut down o/p voltage, re-power on to recover
Working Temperature -30°C ~ +50°C (Refer to output load derating curve)
Working Humidity 20 ~ 95% RH non-condensing
Storage Temperature, Humidity -40°C ~ +80°C, 10 ~ 95% RH
Temperature Coefficient ±0.06%/°C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
Withstand Voltage I/P-O/P:3.75KVAC
Isolation Resistance I/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH
Product Code: PLC-30-24V